Belling 83180302, Руководство пользователя

Страница: 2 / 44

contents & oUR WARRAntY
contents
• INTRODUCTION
• SAFETY
• IGNITION PROCEDURE
• USING THE HOB, GRILL AND
OVEN(S)
• HANDLING BAKING PROBLEMS
• RECOMMENDATIONS AND GOOD
PRACTICES
• USING THE CLOCK PROGRAMMER/
MINUTE MINDER
• CLEANING
• INSTALLATION INSTRUCTIONS
• TECHNICAL DATA
• WIRING DIAGRAMS
• CUSTOMER CARE
IntRoDUctIon
should you need it . . . .
Inside the paperwork which has come
with this appliance, there is a leaflet and
card explaining the terms of our warranty
and guarantee. Simply fill in the details on
the card and post it off; this will register
your appliance.
Glen Dimplex Australia
Unit 2, 205 Abbotts Road
Dandenong south
Victoria 31 75
Australia
Ph: 1300 556 816
Fx: 1800 058 900
Glen Dimplex new Zealand Pty
38 Harris Road, east tamaki
Auckland
new Zealand
Ph: 09 274 8265
Fx: 09 274 8472
If your appliance is covered by the
warranty and guarantee, you will not be
billed for work undertaken should your
appliance be faulty. Terms and conditions
do apply, so please read through the
literature carefully.
Please ensure that you have available
your appliance’s model number and serial
number. There is a space at the back of
this book for recording that information.
Important notice
Please note there may be a cooling fan
fitted to this appliance. It is an integral
part of its safety and functionality. When
the appliance is installed, care must be
taken that the cooling fan’s performance
is not impeded by any objects coming
into contact with it, e.g. installation pipes,
leads, etc. Care must also be taken that
there is sufficient air flow at the rear of
the appliance for the cooling fan to run
at its optimum efficiency. See clearance
dimensions in the installation section of
this booklet. During use, the appliance
must never be disconnected from the
mains supply as this will seriously affect
the safety and performance of the
appliance. Surfaces may become too hot
and gas operated parts may not work
efficiently. The cooling fan is designed
to run on after control knobs have been
turned off. This helps to keep the front of
the appliance and the controls within safe
temperature limits.