Belling 83180302, Руководство пользователя

Страница: 29 / 44

InstAllAtIon InstRUctIons - GAs
Windows and permanent vents should
therefore not be blocked or removed
without first consulting a competent gas
installer.
Failure to install appliances cor-
rectly is dangerous and could lead to
prosecution.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves
during installation.
Moving the cooker
Please note that the weight of this appli-
ance is approximately 60kg (unpacked).
Take care if the appliance needs to be
lifted during installation - always use an
appropriate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does not
shut on your fingers. Take care to avoid
damage to soft or uneven floor coverings
when moving the appliance. Some cush-
ioned vinyl floor coverings may not be
designed to withstand sliding appliances
without marking or damage.
cleARAnces & DIMensIons
Appliance dimensions
All sizes are nominal - some variation is to
be expected. The ‘depth’ of the cooker, as
given below, is to the front of the door &
excluding knobs & handles.
depth:
600mm
width: 549mm or 600mm
height - lid down: 900 - 915mm
height - lid raised:1430 -1445mm
90
mm
400
mm
650
mm
400
mm
90
mm
clearances
No shelf or overhang or cooker hood
should be closer than a minimum of
650mm, but check with cooker hood
manufacturer’s recommendations.
The cooker must have a side clearance
above hob level of 90mm up to a height
of 400mm.
Cookers with drop-down main oven doors
may be fitted flush to base units. How -
ever, for models with side opening doors,
we recommend a side clearance of 30mm
between the cooker and any side wall
adjacent to the hinged side of the doors.