Copiscan 8000 Plus Series Operator Manual
www.bellhowell.imagingcomponents.com
August 25, 2000
1-800-SCAN495
67
Figure 44. Feeder Sensor Location
6.8
Cleaning and Replacing the Lamps
NOTE:
When the user access panel is opened, a safety interlock removes power from the
transport motor.
WARNING:
The lamps may be very HOT. Use precaution when changing the bulb.
The scanner lamps should be cleaned monthly (or as needed), and might need to be
replaced periodically. Replace when the control panel displays the bulb icon (
).
If you need additional lamps, use the Reorder Fax Sheet included on the 8000 Plus CD to
order lamps. You may also call your account representative. Refer to the Contact
Information page at the front of this manual.
The simplex scanner has one lamp, and the duplex scanner has two lamps. Both lamps
can be replaced through the left user access panel. For duplex operation, both the front
and the rear lamps should be changed at the same time for the best reliability.
