Bell and Howell Copiscan 8000 Plus Series Скачать руководство пользователя страница 88

Страница: 88 / 94

Copiscan 8000 Plus Series Operator Manual

www.bellhowell.imagingcomponents.com

August 25, 2000

1-800-SCAN495

Appendix - ACE Control

The scanner has 45 different ACE settings. Each setting gives you a different image when
scanning an identical document.

MODE

SENS NORMAL PHOTO SHIPPER RECOG DROP NO

ACE

Fixed Threshold
Mild Speckle
Delete

Simple Half-Tone,
no contrast or text
enhancement.
Large dot.

Fixed
Threshold,
Very light.

Fixed Threshold
Mild details. Good
for high contrast
text and line
drawing

Large dot HT, mild
contrast
enhancement, de-
screening. Easy
Compress, Easy
Print

Fixed
Threshold,
Light

Adaptive Thresh
Detail Enhanced

Small dot halftone,
slight contrast
enhancement

General Purpose
Adaptive
Threshold. Lighter
Backgrounds

Fixed threshold,
mild detail
enhancement

Fixed
Threshold
Mild speckle
fill

Default

NORMAL

Details and mid-
size features
enhanced. Best
General Purpose
for all graphics

PHOTO

Small dot, slight
detail enhancement
Best General
Purpose Text plus
Picture

SHIPPER

General Purpose
Adaptive Thresh.
Mild Speckle
Delete

RECOG

Darker fixed
threshold, details
enhanced Good
for most high
contrast OCR

DROP

Fixed
Threshold
darker, no
speckle fill
or delete

NO ACE

Fixed
Threshold,
Average
Lightness

Same as S4, but
more detail
sensitivity

Very sensitive to
mid-size features.
Screened
backgrounds
dropped.

Adaptive
threshold, detail
enhanced

Dark Fixed
Threshold,
mild detail
sharpen

More Detail and
Mid-Size
Sensitivity

Small dot halftone,
detail and mid-size
features enhanced

Super Mid-Size
Text sensitivity.
Screened areas
dropped. Good for
degraded images.

Adaptive
threshold, detail
and mid-size
Background
lighter.

Darker fixed
threshold,
detail
enhanced

Fixed
Threshold,
Darker

Same as S6, but
more Background
sensitivity

Halftone in picture
area, HT switched
off in Text areas.

Faint Text is
strongly enhanced

Very sensitive to
details and mid-
size. Background
dropped

Darker with
strong
speckle
delete.

High Detail and
Background
sensitivity

Contrast enhanced
halftone, lightened
in Text areas.

Fixed
Threshold,
Dark

Very high Mid-
Size and
background
sensitivity. Mild
Speckle Fill

Text and Lines
enhanced. Screened
backgrounds
dropped.

S10

Super Detail
Pickup

Text and details
sharpened.

Fixed
Threshold,
Very Dark

Table 3. ACE Control Matrix

Содержание Copiscan 8000 Plus Series






























































































Результаты поиска

Содержание Copiscan 8000 Plus Series

Отзывы:

Bell and Howell Copiscan 8000 Plus Series, Руководство оператора, Страница: 88 / 94

Результаты поиска

Содержание Copiscan 8000 Plus Series

Отзывы: