Belimo TRANE TAF Series, Техническая документация инструкция

Страница: 4 / 168

4
I20683 - Subject to change.
Why Belimo?
A CLOSER LOOK…
Features and Benefits
Brushless DC Motor Technology
Belimo new generation actuators all employ
state-of-the-art halomo sensorless, brushless DC
motor technology. The halomo technology was
developed exclusively by Belimo’s Technology
division and enables Trane to offer the high quality
of brushless DC motor technology inside all actuator
models in the new generation.
With the increase in product lifespan and quality
the TLM series creates a new level of expectation
for actuators installed in VAV applications.
●
Only ONE moving part!
●
No brushes to wear out
●
Position feedback is generated by ASIC
●
Overload proof; uses integrated end stop filtering
●
Running noise is reduced to absolute minimum
©
H
A
LOM
O
B
r
u
s
hle
s s D C
M
o
to
r
Damper Actuators
●
Extensive product range.
●
Specific retrofit offerings.
●
Small dimensions in relation to torque.
●
Microprocessor-controlled Brushless
DC motor increases actuator life span
and reliability & provides constant
running time (most actuators).
●
Cut labor costs with simple direct
coupling.
●
Check damper position easily with
clear position indication.
●
Overload-proof throughout rotation.
●
Temporary restrictions in damper
movement will not change actuator
operation. Actuator returns to normal
operation when restriction is remove.
●
Built-in or add-on mechanical stops to
adjust angle of rotation.
●
Built-in auxiliary switch is easy to use,
offers feedback or signal for additional
device (-S models).
●
Need to change control direction?
Do it easily with a simple switch on
actuator housing.
●
Rugged housings withstand rough
handling in the mechanical room.
●
Automatically compensates for
damper seal wear, ensuring tight
close off.
Spring Return
●
True mechanical spring return – the
most reliable fail-safe.
●
Reverse mount for clockwise or
counterclockwise fail-safe.
●
Manual override crank speeds
installation (TAF Series).
●
3 ft. appliance cable and conduit
connector eases installation.
Non-Spring Return
●
Increased torque output by up to 28%
●
More mounting flexibility –
TLM accepts 3/4" dia. shafts,
TNM, TAM & TGM mounts to 1.05"
dia. jackshafts.
●
New optional external auxiliary
switch(es) or position feedback
potentiometer modules – same
modules for all non-spring return
actuators!
●
Manual override push button.
●
Compatible to discontinued models.