manualshive.com logo in svg

Belimo TRANE TAF Series, Техническая документация инструкция, Страница: 60 / 168

Поделиться
Скачать
Belimo TRANE TAF Series Скачать руководство пользователя страница 60

I20683 - Subject to change. 

Torque min. 18 in-lb, for control of air dampers

Application
For on-off, fail-safe control of dampers in HVAC systems.
Actuator sizing should be done in accordance with the damper
manufacturer’s specifications. Control is on-off from an 
auxiliary contact, or a manual switch. 

The actuator is mounted directly to a damper shaft from 1/4”
up to 1/2” in diameter by means of its universal clamp, 1/2”
shaft centered at delivery.  A crank arm and several mounting
brackets are available for applications where the actuator 
cannot be direct coupled to the damper shaft.

Operation
The TTF series actuators provide true spring return operation
for reliable fail-safe application and positive close off on air tight
dampers. The spring return system provides consistent torque
to the damper with, and without, power applied to the actuator.
The TTF series provides 95° of rotation and is provided with a
graduated position indicator showing 0° to 90°. 
The actuator may be stalled anywhere in its normal rotation
without the need of mechanical end switches.  Power 
consumption is reduced in holding mode.  

The TTF24-S versions are provided with one built-in 
auxiliary switch. This SPDT switch is provided for safety 
interfacing or signaling, for example, for fan start-up. The
switching function is adjustable between 0° and 95°. 

For all accessories, see pages 110 and 132.

Dimensions 

[All numbers in brackets are in millimeters.]

TTF24 (-S) 

On-off, Spring Return Fail-Safe, 24V

Technical Data

TTF24 (-S)

Power supply

24VAC ± 20%, 50/60Hz
24VDC ± 10%

Power consumption

running:  2.5 W
holding:  1.3 W

Transformer sizing

5 VA (class 2 power source)

Electrical connection

3 ft, 18 GA appliance cable 

(-S models have 2 cables)
1/2” conduit connector

Overload protection

electronic throughout 0° to 95° rotation

Angle of rotation

max 95°, adjust. with mechanical stop

Torque

min. 18 in-lb [2 Nm]

Direction of rotation

reversible with cw/ccw mounting

Position indication

visual indicator, 0° to 95°
(0° spring return position)

Auxiliary switch

1 x SPDT 3A (0.5A) @ 250 VAC, 

(-S models)

UL listed adjustable 0° to 95°

Running time

motor: < 75 sec (0 to 18 in-lb)
spring:< 25 sec 

@-4°F to +122°F [-20°C to +50°C]

< 60 sec 

@-22°F [-30°C]

Humidity

5 to 95% RH non-condensing

Ambient temperature

-22°F to +122°F [-30°C to +50°C]

Storage temperature

-40°F to +176°F [-40°C to +80°C]

Housing 

NEMA type 2 / IP42

Housing material

UL94 - 5VA

Agency listings

cULus listed acc. to UL 60730-1 

Noise level 

max:   running  < 50 db (A)

spring return 62 dB (A)

Servicing

maintenance free

Quality standard

ISO 9001

Weight

TTF24

1.4 lbs (0.6 kg)

TTF24-S  1.5 lbs (0.7 kg)

(nominal)

0.43"  [11]

0.77"  [19.5]

4.5" 

[114]

0.2" 

[5.2]

1.57" 

[40]

6.28" 

[159.5]

3.0" 

[76.2]

3.30" 

[83.72]

2.40" 

[61]

0.68"  [16.7]

Standard:

       1/4" to 1/2" 

       1/4" to 5/16"

     

Safety Note
Screw a conduit fitting into the actuator’s bushing.  Jacket the 
actuator’s input and output wiring with suitable flexible conduit.
Properly terminate the conduit in a suitable junction box.

D096

60

Содержание TRANE TAF Series









































































































































































Отзывы:

Нет отзывов