Belden Hirschmann EAGLE20, Руководство пользователя

Страница: 31 / 60

Installation EAGLE20/30
Release 11 09/2020
31
2.3 Installing and grounding the device
2.3.1 Installing the device onto the DIN rail
Note: Verify that there is at least 4 in (10 cm) of space above and below the
device.
Note: The overall shield of a connected shielded twisted pair cable is
connected to the ground connector on the front panel as a conductor.
To mount the device onto a horizontally mounted 35 mm DIN rail according
to DIN EN 60715, proceed as follows:

Slide the upper snap-in guide of the device into the DIN rail.

Press the media module downwards onto the clip-in bar.

Snap in the device.
WARNING
FIRE HAZARD
Install the device in a fire enclosure according to EN 60950-1.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
WARNING
Only for device variants featuring supply voltage with the characteristic
value K9 or KK:
ELECTRIC SHOCK
Install this device solely in a switch cabinet or in an operating site with
restricted access, to which maintenance staff have exclusive access.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.