Belden Hirschmann EAGLE20, Руководство пользователя

Страница: 30 / 60

30
Installation EAGLE20/30
Release 11 09/2020
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:

Checking the package contents
 Installing the SD card (optional)
 Installing and grounding the device
 Installing an SFP transceiver (optional)

Connecting the terminal blocks

Operating the device
 Connecting data cables
 Filling out the inscription label
2.1 Checking the package contents

Check whether the package includes all items named in the section
“Scope of delivery” on page 54 .

Check the individual parts for transport damage.
2.2 Installing the SD card (optional)
Note: For information about the position on the device see “Rear view” on
page 20 .

Push the SD card into the slot with the beveled corner facing upwards.

Tighten the thumb screw hand-tight to fix the SD card.