Belden Hirschmann EAGLE20, Руководство пользователя

Страница: 24 / 60

24
Installation EAGLE20/30
Release 11 09/2020
1.7 Display elements
After the supply voltage is set up, the software starts and initializes itself.
Afterwards, the device performs a self-test. During this process, various
LEDs light up.
1.7.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
LED Display Color Activity Meaning
Power Supply voltage — None Supply voltage is too low
Yellow Lights up Device variants with redundant power
supply:
Supply voltage 1
or 2 is on
flashes 4 times
a period Software update is running. Maintain the
power supply.
Green Lights up Device variants with redundant power
supply:
Supply voltages 1
and 2 are on
Device variants with single power supply:
Supply voltage is on
Status Device Status — None Device starts
Device is not ready for operation
Green Lights up Device is ready for operation.
Characteristics can be configured
Red Lights up The device reports a detected error.
See “Reference Manual GUI Graphical
User Interface”, Chapter “Device Status”.
Flashes 1 time
a period The boot parameters used when the device
has been started differ from the boot
parameters saved.
Start the device again.
RM Ring Manager — None The support of the function is dependent on
the software release. Software support for
the function is unimplemented at the time of
printing this manual.
ACA Storage medium
ACA31
ACA22 — None No ACA connected
Green Lights up ACA storage medium connected
Flashes 3
times a period Device writes to/reads from the storage
medium
Yellow Lights up ACA storage medium inoperative
Check the file system format
See “SD card
interface” on page 27.
Deactivate the write protection on the
ACA31 by pushing the lock towards the
contacts.
Status
RM ACA
Power