Belden Hirschmann EAGLE20, Руководство пользователя

Страница: 28 / 60

28
Installation EAGLE20/30
Release 11 09/2020
1.8.3 USB interface
Note: For information about the position on the device see “Front view” on
page 19 .
The USB socket has an interface for the local connection of an
AutoConfiguration Adapter ACA22. It is used for saving/loading the
configuration data and diagnostic information, and for loading the software.
The USB interface has the following properties:
 Supports the USB master mode

Supports USB 2.0 (data rate max. 480 MBit/s)

Connector type A
 Supplies current of max. 500 mA
 Voltage not potential-separated
 Supported file system: FAT32
Figure Pin Operation
1 VCC (VBus)
2 − Data
3 + Data
4 Ground (GND)
Table 7: Pin assignment of the USB interface
1 2 4 3