Belden GRASS VALLEY KMV-3901, Инструкция по установке и обслуживанию

Страница: 41 / 128

41
KMV-3901/KMV-3911
Installation & Service Manual
7 Click Save .
The new settings are saved locally.
8 Click OK .
The Apply settings button becomes available.
9 Click Apply settings .
The Kaleido system must be restarted for changes to the network configuration to take
effect. A message appears prompting you to reboot the system immediately.
10 Click OK .
You will need to edit the XAdmin URL in your Web browser's address bar, in order to log
on to the multiviewer again.
Installing Kaleido Software Client Applications
In addition to the XAdmin Web client, which does not require installation, the Kaleido
Software includes the following client applications:
• XEdit is a client application used to create layouts for the monitor wall, and to configure
your multiviewer system, from your PC. When this PC has network connectivity to the
multiviewer, you can use XEdit to modify layouts and settings directly on the
multiviewer, or you can work locally on the computer and then export your changes to
the multiviewer.
• If you have only one multiviewer (or if you have more than one but you intend to
always have the same version of the Kaleido Software on all of them), download the
XEdit installer file from the multiviewer’s home page. Whenever you install a new
version of the Kaleido Software on the multiviewer, the next time you open XEdit, your
copy of the application will be automatically updated from the multiviewer. See
Installing XEdit from your Multiviewer’s Home Page on page 42.
Note:
As required by the IEEE-802.3 standard, section 28D.5, 1000 Mbps
full-duplex communication is only supported via auto-negotiation.
Note:
Settings cannot be applied to a multiviewer system while an
upgrade is in progress. If the multiviewer does not reboot after 10 seconds
or so, try clicking
Apply settings again after a minute or two, until the
multiviewer reboots.