Belden GRASS VALLEY KMV-3901, Инструкция по установке и обслуживанию, Страница: 36 / 128

36
Frame Control Panel Operation and IP Network Setup
TCP/UDP Port Usage
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (e.g., router controllers):
Router drivers also use default ports:
a. See also: From multiviewer to multiviewer , on page 34.
b.Configurable.
Port Transport Notes
2000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol
4381 TCP Used to control the multiviewer’s internal router via the Nevion
(Network) protocol
5194 TCP Used to control the multiviewer’s internal router via the NVEP Router
(NP0016) protocol.
14000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP
NVEP NV9000 (NP0017) 9193 TCP
VikinX Modular 4381 TCP
Quintech 9100 TCP
Sony HKSPC 12345 TCP GVGNP Emulator
Utah RCP-3 5001 TCP SC-4 Ethernet
SAM (Snell/Pro-Bel) SW-P-02 2000 TCP
SAM (Snell/Pro-Bel) SW-P-08 14000 TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.