background image

6.  Assembly

6.1  Warning notices

DANGER

Use of incorrect spare parts, accessories or materials!

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating 
materials, may result in death or serious injury. Malfunction and device failure as well as 
material damage can occur.
• 

Only use undamaged original parts, auxiliary and operating materials which are specified 

by the manufacturer to complete all work.

•  Only use the materials approved for the respective application and suitable tools in 

proper working order.

•  Only use pipes that are free of dirt, damage and corrosion.

DANGER

Pressurised system!

Danger of death or serious personal injury through contact with quickly or suddenly 

escaping fluids or through bursting system parts.

•  Before starting work, depressurise the pressurised system and secure it against 

unintentional pressurisation.

•  Set up a safety area around the working area during assembly, installation, maintenance 

and repair work.

•  Before pressurisation, check all system pipe connections for leak tightness and tighten if 

necessary.

•  Slowly pressurise the system.
• 

Avoid pressure blows and high differential pressures.

•  Assemble all pipes free of mechanical stress.
• 

Install the feed lines and drain lines as fixed pipes.

WARNING

Insufficient qualification!

Insufficient qualification of the personnel carrying out work on the product and accessories 

can lead to accidents, personal injury and damage to property as well as impair operation.
All work on the product and accessories may only be carried out by skilled technical 
personnel - compressed gas technology.

CAUTION

Inappropriate assembly!

Inappropriate assembly of the product and the accessories can lead to personal injury and 
damage to property as well as impair operation.
•  Install the product, the accessories, and all parts and materials used so that they are not 

subject to mechanical tension.

• 

Fix hoses in such a way that they do not flap around.

BEKOMAT

®

 33iU / 33iU CO

Original installation and operation manual

28 | 68

Содержание BEKOMAT 33iU





































































Отзывы: