Beko BEKOMAT 16 CO, Оригинальное руководство по установке и эксплуатации

Страница: 28 / 60

7.2.1.2 Power control board DC
Illustration Description / explanation
2
4
5
6
7
1. Loosen the 4 pan-head screws [2] in the top cover and
unscrew the components of the cable gland [4, 5, 6,
7] .
10
12
3
11
2. Raise the top cover [3] a little and pull the cable
terminal [10] of the power control board up and off.
3. Unscrew the pan-head screw [12] and take the power
control board [11] out of the top cover [3] .
+24 VDC (0V)
0V (+24 VDC)
6 mm (0.23“)
60 mm (2.36“)
4. Prepare the 2-wire cable of the voltage supply.
3
I
4
5
6
5. Slide the components of the cable gland [4, 5, 6] over
the cable for voltage supply [I] and insert the cable
into the top cover [3] .
BEKOMAT
®
16 CO Original installation and operation manual
28 | 60