background image

14.2  Disposal work

At the end of its useful life, dispose of the product properly e.g. through a specialist company. Do not dispose of 
electrical and electronic components via municipal waste disposal companies or household waste. Materials such as e.g. 
glass, plastic are recyclable to a major extent and can be used again.

Fulfil the following prerequisites before disposal:

Prerequisites

1.   

The 

BEKOMAT

®

 

has been decommissioned and disassembled.

2.   

The 

BEKOMAT

®

 

has been cleaned and freed of any condensate residue.

Operating material

EU waste code

Adsorption and filter materials, cleaning wipes and 

protective clothing - soiled by oils or other hazardous 

substances

15 02 02

Adsorption and filter materials, cleaning wipes and 

protective clothing - with the exception of those classified 

by 15 02 02

15 02 03

Packaging - paper and cardboard

15 01 01

Packaging - plastic material

15 01 02

Electric and electronic devices with the exception of those 

covered by 20 01 21, 20 01 23 and 20 01 35

20 01 36

BEKOMAT

®

 16 CO

Original installation and operation manual

52 | 60

Содержание BEKOMAT 16 CO





























































Отзывы: