Beko BEKOMAT 16 CO, Оригинальное руководство по установке и эксплуатации

Страница: 26 / 60

Illustration Description / explanation
10
12
3
11
5. Raise the top cover [3] a little and pull the cable
terminal [10] of the power control board up and off.
6. Unscrew the pan-head screw [12] and take the power
control board [11] out of the top cover [3] .
6 mm (0.23“)
1 N/-
2 L/+
PE
60 mm (2.36“)
50 mm (1.96“)
7. Prepare the 3-wire cable of the voltage supply.
I
4
5
6
8. Slide the components of the cable gland [4, 5, 6] over
the cable for voltage supply [I] and insert the cable
into the top cover.
Normally Open (NO)
Common (CO)
Normally Closed (NC)
N
PE
L
Neutralleiter (N)
Schutzleiter (PE)
Phase (L)
PE
N
L
9. Connect the voltage supply cable to the power control
board in accordance with the terminal diagram.
BEKOMAT
®
16 CO Original installation and operation manual
26 | 60