background image

2.2  Responsibility of the operating company

The responsible operating company must ensure the following to prevent accidents, incidents and adverse effects on the 

environment:
•  Before all actions, check to ensure that the manual available does in fact belong to the product.

•  The product and the accessories are used, serviced and repaired in accordance with the intended use.

•  All applicable statutory requirements, safety regulations and accident prevention regulations are being adhered to.

•  All regulations and operating guidelines for safe working and information regarding behaviour in the event of 

accidents and fires are accessible at the operating location at all are times.

•  The product and accessories are only used with the recommended and fully operable safety equipment.

• 

All assembly, installation and maintenance work is carried out by qualified skilled technical personnel only.

•  Personnel have the necessary personal protective equipment available and also use this equipment.

•  Suitable technical safety measures are taken so that the permissible operating parameters are not exceeded or 

undershot.

BEKOMAT

®

 16 CO

Original installation and operation manual

6 | 60

Содержание BEKOMAT 16 CO





























































Отзывы: