Beha-Amprobe GT-650, Руководство пользователя

Страница: 82 / 108

GT-650/GT-900 User's Manual
82
Example: MUNICH
TYP...... Type (function in single measurements or AUTO-TEST name in
AUTO-TEST function). It is attached automatically on bases of
carried out measurement.
Example: R
PE
(for TC#: #01)
MAN ... Manufacturer of the appliance (it can be edited by “es control”
software only) (17 characters max.)
Example: BOSCH
SN#...... Serial Number of the appliance (it can be edied by “es control”
software only) (17 characters max.)
Once all attributes on 2/3 SAVE screen are checked (they cannot be modified
without “es control” software) select 3/3 SAVE screen and check offered
attribute as follows:
REM .... Remarks (it can be edited by “es control” software only) (750
characters max.)
Once all attributes suit to current measurement press the “SAVE” menu key
again, SAVING information will be displayed for a while and the result will
be saved.
Notes!

Max. number of entered appliances is 10.000 (GT-900) / 1.000 (GT-650). Max.
number of saved results is 5.000 (GT-900) / 500 (GT-650). When any of them
reaches 80% of total value, the message MEMOPRY ALLOCATION - 82,5%
(example) will be displayed for a while after switching on the tester. If both
(number of entered appliances and number of saved results) are higher than
80% of total value, then higher percentage will be displayed.

When the number of entered appliances reaches 100% of total value (full
memory), message APP. MEMORY FULL will be displayed for a while after
pressing the “NEW” (new appliance) menu key.
When the number of saved results reaches 100% of total value (full memory),
message RESULT MEMORY FULL will be displayed for a while after pressing the
“SAVE” function key.

SAVE operation can be much easier done by using an USB keyboard. All
selections/entries can be done by the keyboard instead of using four menu keys
F1 … F4 and four function keys F5 … F8. See detailed information on how to use
USB keyboard in section “Entry of Appliance Code and it’s Attributes by Using an
External Keyboard” on page 85. It is recommended to use original keyboard
supplied by the GT-650/GT-900 tester supplier (the operation of the keyboard in
combination with GT-650/GT-900 tester is approved).

SAVE operation can be much easier done also by using an USB barcode reader.
Entries like AP# (appliance code), CL# (client code), DES (description), SC# (Site
code) and LOC (location) can be done by the barcode reader when cursor is
blinking on the GT-650/GT-900 screen. See detailed information on how to use
USB barcode reader in section “Entry of Appliance Code and it’s attributes by
using a Bar Code Reader” on page 88. It is recommended to use original barcode
reader supplied by the GT-650/GT-900 tester supplier (the operation of the
barcode reader in combination with GT-650/GT-900 tester is approved).

SAVE operation can be done also by using both, keyboard and barcode reader
simultaneously.