manualshive.com logo in svg

Beha-Amprobe GT-650, Руководство пользователя

Поделиться
Скачать
Beha-Amprobe GT-650 Скачать руководство пользователя страница 78

GT-650/GT-900 User's Manual 

78 

 

 

 

 

no AUTO-TEST steps are created under this number. 

 

Warning “INVALID AUTO-TEST” will be displayed in 
COMBINED mode when scanning an appliance code if 
the first three digits do not correspond to any possible 
AUTO-TEST e.g. 005. The same warning will be 
displayed also when scanning AUTO-TEST code in 
AUTO function – quick approach (see the explanation 
on page 65) if the first three digits do not correspond 
to any possible AUTO-TEST e.g. 005.  

 

 

Purpose of COMBINED mode: 

 

Some operators may already possess combined appliance 
labels that were created for operation e.g. in 
combination with GT-800 tester. In order to use them in 
combination with GT-900 tester COMBINED mode can be 
selected. 

 

AUTO-TEST MODE:  

This menu selects the settings of the AUTO-TEST. There 
are two AUTO-TEST modes available: STANDARD mode 
and FAST mode.  

 

 

Set cursor to appropriate line by using the “

▼

” and “

▲

” 

menu keys, then select the mode by pressing the “SEL” 
menu key and confirm it by pressing the “

” menu key. 

 

LANGUAGE Menu 

 

This menu selects the menu language. There are two languages available: ENGLISH 
and GERMAN. 
Set cursor to appropriate line by using the “

▼

” and “

▲

” menu keys, then select the 

language by pressing the “SEL” menu key and confirm it by pressing the “

” menu 

key. 
 

 

CONTRAST Menu 

 

This menu is used to set the display contrast. The contrast can be adjusted by using 
the “-“ and “+” menu keys. It can also be set to default value by pressing the 
“DFLT” (Default) menu key. Confirm set contrast by pressing the “

” menu key. 

 

TESTER INFO Menu 

 

This menu shows instrument information as hardware and firmware version. 
The following information can be read in this menu: Model, serial number, 
catalogue number, firmware version and hardware version. 
 

 

         

Figure 56: Tester info menu (example for GT-900)

 

 

 

Содержание GT-650













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды