manualshive.com logo in svg

Beha-Amprobe GT-650, Руководство пользователя

Поделиться
Скачать
Beha-Amprobe GT-650 Скачать руководство пользователя страница 77

GT-650/GT-900 User's Manual 

77 

 

 
KEYBOARD: 

This menu selects the type of keyboard which is used. 
ENGLISH and GERMAN keyboards are supported.  

 

Set cursor to appropriate line by using the “

▼

” and “

▲

” 

menu keys, then select the keyboard by pressing the 
“SEL” menu key and confirm it by pressing the “

” menu 

key. 

 

ACOUSTIC SIGNAL:  

This menu selects the settings of acoustic signals. The  

  

following 

general 

intensity 

can be selected for all sounds: 

HIGH, OFF or LOW. 

 

 

Besides, sound intensity defined above can be individually 
enabled or disabled for KEYS (keys F1 … F8), KEYBOARD, 
FAIL BEEP @ TEST (failed result is accompanied with beep 
sound during measurement), FAIL BEEP > TEST 1s (failed 
result is marked with beep sound lasting 1 s after 
finishing the measurement) or FAIL BEEP > TEST 3s (failed 
result is marked with beep sound lasting 3 s after  

 

 

finishing the measurement). Confirm the selection by 
pressing the “

” menu key. 

 

  

Note! 

 

 

All settings can be set to default values by pressing the 
“DFLT” menu key. It means general intensity for all 
sounds will be set to HIGH, KEYS, KEYBOARD and FAIL 
BEEP @ TEST will be activated and FAIL BEEP > TEST will 
be set to 1 s. 

  

BARCODE MODE:  

This menu selects the settings of the barcode reader 
(STANDARD or COMBINED). The mode relates only to 
barcode reading of the appliance code in AUTO mode. 
There will be no effect when reading any other 
parameter/text like client, site, location, description etc.). 

 

 

 

STANDARD mode: The appliance barcode consists of 
appliance code only, meaning all up to 17 digits are 
dedicated to appliance code. 

 

 

 

 

COMBINED mode: The appliance barcode consists of the 
AUTO-TEST code (first three digits) and the appliance 
code (next up to 17 digits). First three digits must 
obligatory fit to one of available AUTO-TEST codes (145-
151, 160, 161, 241-244, 131-137, 231-234, 400, 410-413, 
500-999), see the chapter “AUTO-TEST (GT-900 only)” 
starting on page 53. 

 

 Notes! 
 

When selecting TC# for an appliance the following  

 

warnings can appear: 

 

Warning “INVALID LABEL” will be displayed if barcode 
is too short or too long (it must contain 3 … 17 
characters in STANDARD mode and 4 … 20 characters 
in COMBINED mode). 

 

Warning “TEST NOT DEFINED” will be displayed in 
COMBINED mode if first three digits do correspond  

 

to possible customer-created AUTO-TEST (e.g. 520) but  

Содержание GT-650













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды