Beha-Amprobe GT-650, Руководство пользователя

Страница: 73 / 108

GT-650/GT-900 User's Manual
73
Figure 54: Test step selection menu (example, rotary
switch is in R
PE
position)
Note!
VISUAL INSP. step is automatically added as the first test
step and cannot be removed/edited while creating the
AUTO-TEST. It can be removed/edited later in EDIT/VIEW
menu.
- Select test steps one by one by using the rotary switch
and confirm each test by the “ADD” menu key.
Note!
Customer-created CORD AUTO-TEST or PRCD AUTO-TEST
or combined AUTO-TEST (combined means AUTO-TEST
for standard appliance with built in CORD or PRCD test
steps like water pump with PRCD) can also be created.
When rotary switch is in CORD/PRCD position, TYPE
(CORD, PRCD, PRCD-S, PRCD-S+ or PRCD-K) can be
selected by using the “TYPE” menu key. Individual test
step inside selected TYPE can be selected by using the
“SEL” menu key. Default test step offered is ALL. It
means all test steps from selected TYPE will be added.
- End the selection by pressing the “END” menu key, the
display turns to EDIT/VIEW mode, see the figure below.
All settings are saved now.
Figure 55: EDIT/VIEW mode (example, standard
appliance)
- Check all steps by using the “
▼
” and “
▲
” menu keys.
- Edit test steps (add or delete some step) by using the “
” and then “DEL” and “ADD” menu keys.
- Adjust test parameters and/or limit values by using the
“PAR” and “SEL” menu keys.
- Press the “EXIT” function key to exit CREATE AUTO-TEST
menu.