manualshive.com logo in svg

Beckman Coulter SW 32 Ti, Инструкция по эксплуатации

Поделиться
Скачать
Beckman Coulter SW 32 Ti Скачать руководство пользователя страница 36

LXL-TB-015BB

Warranty-2

  

years completed, provided that such a unit was manufactured or rebuilt by Beckman Coulter), and (ii) if 
the centrifuge is currently covered by a Beckman Coulter warranty or Full Service Agreement, all labor 
necessary for repair of the centrifuge.

3.

If a Beckman Coulter rotor covered by this warranty is damaged due to a malfunction of a 
Beckman Coulter ultracentrifuge covered by an Ultracentrifuge System Service Agreement, 
Beckman Coulter will repair or replace the rotor free of charge.

4.

If a Beckman Coulter rotor covered by this warranty is damaged due to a failure of a Beckman Coulter 
tube, bottle, tube cap, spacer, or adapter, covered under the Conditions of this Warranty, Beckman 
Coulter will repair or replace the rotor and repair the instrument as per the conditions in policy point (2) 
above, and the replacement policy.

5.

Damage to a Beckman Coulter rotor or instrument due to the failure or malfunction of a non-Beckman 
Coulter tube, bottle, tube cap, spacer, or adapter is not covered under this warranty, although 
Beckman Coulter will assist in seeking compensation under the manufacturer’s warranty.

Disclaimer

IT IS EXPRESSLY AGREED THAT THE ABOVE WARRANTY SHALL BE IN LIEU OF ALL WARRANTIES OF FITNESS 
AND OF THE WARRANTY OF MERCHANTABILITY AND BECKMAN COULTER, INC. SHALL HAVE NO LIABILITY 
FOR SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER ARISING OUT OF THE 
MANUFACTURE, USE, SALE, HANDLING, REPAIR, MAINTENANCE, OR REPLACEMENT OF THE PRODUCT.

Factory Rotor Inspection Service

Beckman Coulter, Inc., will provide free mechanical and metallurgical inspection in Indianapolis, Indiana, 
USA, of any Beckman Coulter rotor at the request of the user. (Shipping charges to Beckman Coulter are the 
responsibility of the user.) Rotors will be inspected in the user’s laboratory if the centrifuge in which they are 
used is covered by an appropriate Beckman Coulter Service Agreement. Contact your local Beckman Coulter 
office for details of service coverage or cost.

Before shipping, contact the nearest Beckman Coulter Sales and Service office and request a Returned Goods 
Authorization (RGA) form and packaging instructions. Please include the complete rotor assembly, with 
buckets, lid, handle, tube cavity caps, etc. A SIGNED STATEMENT THAT THE ROTOR AND ACCESSORIES ARE 
NON-RADIOACTIVE, NON-PATHOGENIC, NON-TOXIC, AND OTHERWISE SAFE TO SHIP AND HANDLE IS 
REQUIRED.

Содержание SW 32 Ti







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды