manualshive.com logo in svg

Beckman Coulter SW 32 Ti, Инструкция по эксплуатации

Поделиться
Скачать
Beckman Coulter SW 32 Ti Скачать руководство пользователя страница 32

LXL-TB-015BB

24

SW 32 Ti and SW 32.1 Ti Swinging-Bucket Rotors

Supply List  

 •

original purchase order number, billing number, and shipping number, if possible,

 •

name and email address of the person to be notified upon receipt of the rotor or accessory at 
the factory, 

 •

name and email address of the person to be notified about repair costs, etc. 

To protect our personnel, it is the customer’s responsibility to ensure that all parts are free from 
pathogens and/or radioactivity. Sterilization and decontamination must be done before returning 
the parts. Smaller items (such as tubes, bottles, etc.) should be enclosed in a sealed plastic bag.

All parts must be accompanied by a note, plainly visible on the outside of the box or bag, stating that they 
are safe to handle and that they are not contaminated with pathogens or radioactivity.

 

Failure to attach 

this notification will result in return or disposal of the items without review of the reported problem.

Use the address label printed on the RMA/RGA form when mailing the rotor and/or accessories.

Customers located outside the United States should contact their local Beckman Coulter office.

Supply List

NOTE

Publications referenced in this manual can be obtained at www.beckmancoulter.com, by 

calling Beckman Coulter at 1-800-742-2345 in the United States, or by contacting your local 
Beckman Coulter office.

See the Beckman Coulter 

Ultracentrifuge Rotors, Tubes & Accessories

 catalog (BR-8101, available at 

www.beckmancoulter.com) or contact Beckman Coulter Sales (1-800-742-2345 in the United States) 
for detailed information on ordering parts and supplies. For your convenience, a partial list is given 
below.

Replacement Rotor Parts

Description

Part Number

SW 32 Ti rotor assembly

369650

SW 32 Ti buckets (set of 6, black, with caps and O-rings)

369647

SW 32 Ti bucket O-ring

812715

SW 32 Ti cap (black)

369643

SW 32.1 Ti rotor assembly

369651

SW 32.1 Ti buckets (set of 6, red, with caps and O-rings)

369648

SW 32.1 Ti bucket O-ring

812715

SW 32.1 Ti cap (red)

369645

Rotor stand

332400

Overspeed disk (32,000 RPM)

335456

Содержание SW 32 Ti







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды