Beckhoff eXtended Transport System, Руководство по эксплуатации

Страница: 96 / 114

Maintenance and cleaning
96 ─── Version: 2.2 XTS
10.2
Intervals
Operation outside the permissible environmental conditions and op-
erating states shortens the intervals. The service life of consum-
ables may be shortened depending on the mechanical dynamics
due to mounted devices and movements.
We have provided you with a list of maintenance work and intervals
for the associated components below. The intervals are based on
the total operating time of the system and not on the operating time
of individual components. The data apply to laboratory conditions
and a relative humidity of 50% at 25 °C.
10.2.1
Modules
Components Interval Maintenance
Coil cores 6 months Visual inspection of the coil cores for abrasion
Feedback Sensor Sys-
tem 6 months Visual inspection of the sensor surfaces for abrasion
Machine bed 6 months Check the fastening of the modules to the machine bed
10.2.2
Mover
Components Interval Maintenance
Guide rollers 3 months
or when the expected ser-
vice life is reached Check the guide rollers for wear and breakouts
Magnetic plates 6 months Check the magnetic plates for abrasion and damage
Encoder flag 6 months Check whether the encoder flag is secure
6 months Check that the encoder flag is not rubbing against the
module sensors
Carbon fiber brush 6 months Check whether the brush exists
6 months Check that the brush is firmly seated
6 months Check whether the distance between the brush and the
guide rail is less than 1 mm.