Beckhoff EP3204, Документация

Страница: 84 / 92

Commissioning/Configuration
EP3204 and EP3314 84 Version: 2.2
Index 6020: TC Inputs Ch.3
Index (hex) Name Meaning Data type Flags Default
6020:0 TC Inputs Ch.3 Maximum subindex UINT8 RO 0x11 (17
dec
)
6020:01 Underrange Is set if the value falls below the operating range of the
sensor or the process record contains the lowest possi-
ble value. BOOLEAN RO 0x00 (0
dec
)
6020:02 Overrange Is set if the value exceeds the operating range of the
sensor or the process record contains the highest possi-
ble value. BOOLEAN RO 0x00 (0
dec
)
6020:03 Limit 1 Only when limit check is active BIT2 RO 0x00 (0
dec
)
1 Value below set limit
2
Set limit exceeded
3
Set limit reached
6020:05 Limit 2 Only when limit check is active BIT2 RO 0x00 (0
dec
)
1 Value below set limit
2
Set limit exceeded
3
Set limit reached
6020:07 Error The error bit is set if the process data is invalid (cable
break, overrange, underrange) BOOLEAN RO 0x00 (0
dec
)
6020:0E Sync error Only in DC: bit is set if the slave is not able to operate
synchronous with master, because it cannot keep up with
the cycle time. BOOLEAN RO 0x00 (0
dec
)
6020:0F TxPDO State Validity of the data of the associated TxPDO BOOLEAN RO 0x00 (0
dec
)
0 valid
1 invalid
6020:10 TxPDO Toggle TxPDO toggle is toggled by the slave when the data of
the associated TxPDO is updated. BOOLEAN RO 0x00 (0
dec
)
6020:11 Value Analog input value (resolution in 1/10°C) INT16 RO 0x0000 (0
dec
)
Index 6030: TC Inputs Ch.4
Index (hex) Name Meaning Data type Flags Default
6030:0 TC Inputs Ch.4 Maximum subindex UINT8 RO 0x11 (17
dec
)
6030:01 Underrange Is set if the value falls below the operating range of the
sensor or the process record contains the lowest possible
value. BOOLEAN RO 0x00 (0
dec
)
6030:02 Overrange Is set if the value exceeds the operating range of the sen-
sor or the process record contains the highest possible
value. BOOLEAN RO 0x00 (0
dec
)
6030:03 Limit 1 Only when limit check is active BIT2 RO 0x00 (0
dec
)
1 Value below set limit
2 Set limit reached
3 Set limit exceeded
6030:05 Limit 2 Only when limit check is active BIT2 RO 0x00 (0
dec
)
1 Value below set limit
2 Set limit reached
3 Set limit exceeded
6030:07 Error The error bit is set if the process data is invalid (cable
break, overrange, underrange) BOOLEAN RO 0x00 (0
dec
)
6030:0E Sync error Only in DC: bit is set if the slave is not able to operate syn-
chronous with master, because it cannot keep up with the
cycle time. BOOLEAN RO 0x00 (0
dec
)
6030:0F TxPDO State Validity of the data of the associated TxPDO BOOLEAN RO 0x00 (0
dec
)
0 valid
1 invalid
6030:10 TxPDO Toggle TxPDO toggle is toggled by the slave when the data of the
associated TxPDO is updated. BOOLEAN RO 0x00 (0
dec
)
6030:11 Value Analog input value (resolution in 1/10°C) INT16 RO 0x0000 (0
dec
)