Beckhoff EP3204, Документация

Страница: 72 / 92

Commissioning/Configuration
EP3204 and EP3314 72 Version: 2.2
Index 8000: TC Settings Ch.1
Index (hex) Name Meaning Data type Flags Default
8000:19 Sensor type Thermocouple UINT16 RW 0x0000 (0
dec
)
0 Type K -200 °C to 1370 °C
1 Type J -100°C to 1200°C
2 Type L 0°C to 900°C
3 Type E -100°C to 1000°C
4 Type T -200°C to 400°C
5 Type N -100°C to 1300°C
6 Type U 0°C to 600°C
7 Type B 600°C to 1800°C
8 Type R 0°C to 1767°C
9 Type S 0°C to 1760°C
10 Type C 0°C to 2320°C
100 ± 30 mV (1 µV resolution)
101 ± 60 mV (2 µV resolution)
102 ± 75 mV (4 µV resolution)
8000:1B Wire calibration
1/32 ohm Only for 2-wire measurements:
contains the resistance of the supply line for the tempera-
ture sensor (in 1/32 ohm). INT16 RW 0x0000 (0
dec
)
Index 8010: TC Settings Ch.2
Index (hex) Name Meaning Data type Flags Default
8010:0 TC Settings Ch.2 Maximum subindex UINT8 RO 0x1B (27
dec
)
8010:01 Enable user scale Activates user scaling BOOLEAN RW 0x00 (0
dec
)
8010:02 Presentation Presentation of the measured value BIT3 RW 0x00 (0
dec
)
0 Signed, in two's complement
1 Most significant bit as sign
2 High-resolution (1/100 °C steps)
8010:05 Siemens bits The S5 bits are displayed in the three low-order bits BOOLEAN RW 0x00 (0
dec
)
8010:06 Enable filter Enable filter, which makes PLC-cycle-synchronous data
exchange unnecessary BOOLEAN RW 0x00 (0
dec
)
8010:07 Enable limit 1 Activates limit check for limit 1 BOOLEAN RW 0x00 (0
dec
)
8010:08 Enable limit 2 Activates limit check for limit 2 BOOLEAN RW 0x00 (0
dec
)
8010:0A Enable user calibra-
tion Activates user calibration BOOLEAN RW 0x00 (0
dec
)
8010:0B Enable vendor cali-
bration Activates vendor calibration BOOLEAN RW 0x01 (1
dec
)
8010:0C Cold junction com-
pensation Cold junction compensation BIT2 RW 0x00 (0
dec
)
0 Cold junction compensation takes place via the
PT-1000 in the plug connector.
1 Cold junction compensation is not active.
2 Cold junction compensation takes place via the
process data.
3 Cold junction compensation takes place via the
PT-1000 in the plug connector of channel 1.
8010:0E Swap limit bits Swaps the two limit bits, in order to achieve compatibility
with older hardware versions. BOOLEAN RW 0x00 (0
dec
)
8010:11 User scale offset User scaling: Offset INT16 RW 0x0000 (0
dec
)
8010:12 User scale gain User scaling: Gain INT32 RW 0x00010000
(65536
dec
)
8010:13 Limit 1 Value for limit 1 INT16 RW 0x0000 (0
dec
)
8010:14 Limit 2 Value for limit 2 INT16 RW 0x0000 (0
dec
)