Beckhoff EL3632, Документация

Страница: 133 / 214

Commissioning
EL3632 133 Version: 2.8
Index 80n8 AI advanced settings (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
80n8:0 AI Advanced Settings Maximum subindex UINT8 RO 0x06 (6
dec
)
80n8:06 Input Amplifier permitted values: BIT2 RW 0x00 (0
dec
)
0: Preset (setting via object 0x80n0:15 [ } 132] )
1: ON (switch-on of the analog amplifier x20 irrespective
of filter settings; gain factor of 20 is not changeable)
2: OFF (switch-off of the analog amplifier irrespective of
the filter settings)
Index 80nF AI Vendor data (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
80nF:0 AI vendor data Maximum subindex UINT8 RO 0x04 (4
dec
)
80nF:01 Calibration offset
(gain 1) Offset (vendor calibration), gain 1 INT16 RW 0x0000 (0
dec
)
80nF:02 Calibration gain (gain
1) Gain (vendor calibration), gain 1 INT16 RW 0x0000 (0
dec
)
80nF:03 Calibration offset
(gain 20) Offset (vendor calibration), gain 20 INT16 RW 0x0000 (0
dec
)
80nF:04 Calibration gain (gain
20) Gain (vendor calibration), gain 20 INT16 RW 0x0000 (0
dec
)
Command object
Index FB00 command
Index (hex) Name Meaning Data type Flags Default
FB00:0 DCM Command Command interface UINT8 RO 0x03 (3
dec
)
FB00:01 Request 0x8000: Software reset, hardware is re-initialized with the
current CoE configuration (this otherwise happens only
during the transition to INIT) OCTET-
STRING[2] RW {0}
FB00:02 Status 0x8000: 0x01 if a reset has taken place UINT8 RO 0x00 (0
dec
)
FB00:03 Response 0x8000: not used OCTET-
STRING[4] RO {0}
Input data
Index 60n0 Status (for n = 0: channel 1; n = 1: channel 2)
Index (hex) Name Meaning Data type Flags Default
60n0:0 SAI Inputs Maximum subindex UINT8 RO 0x10 (16
dec
)
60n0:01 Underrange Indicates that the electrical measuring range is undershot BOOLEAN RO 0x00 (0
dec
)
60n0:02 Overrange Indicates that the electrical measuring range is exceeded BOOLEAN RO 0x00 (0
dec
)
60n0:03 Limit 1 1: one or more values smaller than or equal to Limit 2
2: one or more values greater than or equal to Limit 1
3: 1 and 2 both true BIT2 RO 0x00 (0
dec
)
60n0:07 Error Measuring error BOOLEAN RO 0x00 (0
dec
)
60n0:0E Sync error Synchronization error BOOLEAN RO 0x00 (0
dec
)
60n0:0F TxPDO State Validity of the data of the associated TxPDO (0 = valid, 1
= invalid). BOOLEAN RO 0x00 (0
dec
)
60n0:10 TxPDO Toggle A new measured value is available (if the toggle bit was
changed).
Status bits may be changed independent from the toggle
bit. BOOLEAN RO 0x00 (0
dec
)