IPC@CHIP SC2x3
Hardware Manual V1.02 [01.03.09]
©2000-2009 BECK IPC GmbH
Page 41
10 Custom series programming of SC2x3
The program chiptool.exe can be used to program images to the SC2x3. Chiptool can be started and
configured through command line parameters. This can be used to remote chiptool from other applications to
program SC2x3 in series with high quantities.
Chiptool also can program up to eight IPC@CHIPs parallel by using a PC with eight serial RS232 ports.
See chiptool help file for more information.