Bayer HealthCare Clinitek 500, Руководство по эксплуатации

Страница: 33 / 82

G. Setup Menu #6
Touch to move to the next Setup menu when all
selections have been made on the fifth menu. The new
menu is displayed as, for example:
1. Positive levels for COL/CLA:
1. If either color or clarity was selected as a test to be
reported, the first result that is considered to be pos-
itive can be selected. As with the chemistry tests and
if “Mark positives” (Step E-2 previously) is ON, these
levels are used by the Analyzer to determine which
specimens meet the criteria for the confirmatory and
microscopic reports. Positive results are also marked
with an asterisk (*) in the displayed and printed report
and in the data transferred to a host computer. When
the selection key is touched, the display shows the first
level that is considered to be positive.
1. a. Touch the appropriate cycle key until the display
shows the first level you want to have marked as
positive. All results later in the list are also called
positive. If you have not changed or removed any
of the descriptions (Step F-2), the options are:
Set options.
Positive levels for COL/CLA
Flags for confirmatory tests
Flags for microscopics
1. b. Touch when both selections have been made
to return to the previous option menu.
2. Flags for confirmatory tests:
2. Up to five tests (of those to be reported) can be select-
ed for the confirmatory report. If a specimen has a pos-
itive result for any of the tests selected,
and if “Mark
positives” is ON (see Step E-2), the record will be
flagged and can be recalled as part of a confirmatory
report. Further testing can then be performed on these
specimens and the results of the confirmatory testing
entered into the record, if desired.
2. a. When the action key is touched, the display will
show a list of all tests that are to be reported. Touch
the selection box next to the tests you want to
include in the confirmatory report; a check mark
will appear in the box. To remove a selection, touch
the box again and the box will become blank.
2. b. Touch when the selections have been made to
return to the previous option menu.
3. Flags for microscopics:
3. As with the confirmatory report, up to five tests can
be selected for the microscopics report. This report
can be used to list those specimens that may require
a microscopic examination. Select the tests for the
report in the same manner as for the confirmatory
report, then touch
to return to the previous option
menu. (“Mark positives” [Step E-2] must be ON in
order to obtain the report.)
Color: Clarity:
YELLOW GREEN CLEAR TURBID
ORANGE BLUE SL CLOUDY OTHER
RED BROWN CLOUDY
*OTHER
*If visually determined
Revised 5/01
3.11
63032-Section 3 11/8/06 9:21 AM Page 11