Bayer HealthCare Clinitek 500, Руководство по эксплуатации

Страница: 23 / 82

Section 3
SELECTING YOUR OPTIONS
General Information
All interaction between the operator and the
CLINITEK ® 500 Analyzer is through the touch screen.
Messages, options, and requests for information are
displayed, along with “keys” that can be touched to
respond in the desired manner. A light touch is all that
is necessary to activate the key.
Do not use anything hard
or pointed on the touch screen. (If a key does not
respond, press it for a slightly
longer time, rather than
harder.)
• If an option key is active, the key symbol is dis-
played fully lit. Whenever an active key is touched, you
will see a change either in the display or in the instru-
ment operation.
• If an option key is not active, the key symbol is
dimmed and a unique double tone will sound if it is
touched.
Several keys are displayed on various screens, and they
will always have the same function whenever they are dis-
played:
Returns the screen to the Ready/Run screen;
must be touched when exiting the Setup Routine
Return to
in order to save the changes made. If this key
Ready/
is touched from a screen in which data is
Run
requested and ( Enter ) was not touched first,
any data that was entered will NOT be saved. This
key appears on most screens, always in the upper
right corner.
Cancels the run or the last strip. If the run is can-
celled, all strips on the platform are immediately
Stop
moved to the waste bin and no results are
Run
reported for them. This key is displayed on the
Run screen and becomes active (fully lit)
as soon as the first strip in a run is detected. It is
located in the upper right corner, in place of
the key.
Touching this key causes a Help screen to be dis-
played that has information pertaining to the
Help
screen from which the key was touched. Touch the
key from the Help screen to return to the
previous screen. The key is not displayed on all
screens but, when displayed, always appears to
the left of the
( Return to Ready ) or ( Stop
Run ) key.
Changes the display to the next screen in a
series. This key is displayed only if there are addi-
Next
itional screens to be viewed and always appears in
Screen
the lower right corner.
Changes the display back to the previous screen
in a series. This key is displayed only if there are
Previous
earlier screens in the series to be viewed and
Screen
always appears in the lower right corner, imme-
diately above the
key ( Next Screen ) location.
Must be touched in order to accept data that has
been entered, such as ID and sequence num-
bers, date, and time.
If the screen is exited with-
Enter
out first touching , the newly entered data is
not saved; any data previously in memory is
retained.
Moves the cursor one space to the right from its
current position. If the cursor is at its right-most
position, touching this key has no effect. Moving
the cursor does not erase any characters; new
characters can be entered directly over the incor-
rect characters.
Moves the cursor one space to the left. The char-
acter at the current position is usually erased
before the cursor is moved to the left. If the cur-
sor is at its left-most position, the cursor does not
move. Exception: if this key is displayed in con-
junction with the
key ( Move Right ), the exist-
ing characters are not erased as the cursor is
moved.
Revised 9/99
3.1
Move
Right
Move
Left
63032-Section 3 11/8/06 9:21 AM Page 1