Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 27 / 49

POWER SUPPLY DIAGNOSTICS
Check power cable into back of game.
Check AC cord from power strip in game.
Verify power strip rocker switch is ON.
(Switch cord into different socket in power strip)
Check AC connection to power supply.
Ensure Power Supply switch is set to 115V
(Some power supplies may not have this)
Ensure Power switch is on.
Check if Power Supply Fan is turning:
If Fan is turning:
Power supply is working. If game still has no 12 Volts DC, then Power Supply is faulty.
Replace Power Supply. AAPS1008
Fan turns.
That cable is OK.
Turn power OFF. Disconnect all 12 volt
output wires from power supply only. Turn
power ON.
Fan turns. Fan does not turn
Replace Power
Supply.
(AAPS1008)
Turn power OFF. Unplug all outputs from the large PCB. Recon-
nect the 12 volt output wires from Power Supply to PCB main
board. Turn power ON.
Fan turns.
Turn power OFF. Recon-
nect the outputs at the
PCB one at a time. Wait
60 seconds between
tests to turn power ON.
Fan does not turn.
That cable or related component is
shorted out or causing an overload. See
Jumper Cable Pin-Outs to see which
component might be at fault.
Fan does not turn. Short in PCB - Replace.
If Fan is not turning:
27