Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 30 / 49

HOW TO: Adjust Wheel Sensor
To Test:
Enter menu and go to MENU 8.
Spin Wheel slowly downward, and watch display’s wheel
position readout.
The wheel position value should change as soon as next
panel crosses arrow point.
To Adjust:
Turn Phillips head screw to move sensor.
Continue spinning wheel slowly down-
ward, and watch display’s wheel position
readout; adjusting screw until panel
changes at arrow.
Wheel sensor is located behind the arrow on wheel.
It “reads” the notch in the side of the wheel to tell the
game when the panel has changed.
Part #’s:
Pointer Assy. AAPO8800
Sensor alone - AACB8852
HOW TO: Clean Game
Use a mild soap solution and a clean lint free cloth to wipe down game.
Do NOT use any cleaning solvents on the game’s graphics!
Front Plexi will slide up. (Like a roll top desk)
How to:
Open front door and unclip
2 latches holding window
bracket.
Push up on bracket, and roll plexi upwards.
Clean inside of plexi with lint free cloth or “swiffer”
duster.
30