Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 33 / 49

HOW TO: Remove Wheel
The wheel will have to be removed to access engaging solenoid to repair/replace.
Step 1:
Remove the back door from the
game using a 644 key.
Step 2:
Remove the top back
from the game.
There are 4 screws on
top of the game to re-
move.
Inside the game there are
2 screws on the LEFT
and 2 screws on the
RIGHT to remove.
(RIGHT side screws
shown below)
Step 3:
Unplug the 8850-1 and the 8850-3 cables.
Remove the 3 cable clamps from the board on the
RIGHT side.
Step 4:
Remove the screws from the upper and lower side boards from the LEFT and
RIGHT side of the game.
Remove the boards.
REMOVE
Step 5:
Remove the pin from the linkage below the wheel on the RIGHT side.
Separate the linkage after removing the pin.
Step 6:
Remove the upper and lower bolts from the sides of the wheel cradle.
33