Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 31 / 49

HOW TO: Set Brake Tension
To Test:
Turn off game and flip dipswitch #4 ON.
Turn game on.
The display will show “TEST BRAKE”
Use plunger handle to give the wheel a
good spin, Let the wheel coast to a stop like
a normal game play.
If brake is set correctly, screen will show a
number between 50 - 70.
If less than 50: Loosen Brake
If greater than 70: Tighten Brake
To Adjust:
To loosen brake:
Loosen top nut and move 1/4 inch up. The
threaded rod will drop as top nut moves up.
Spin bottom nut up tight to bracket. Tighten
both nuts.
To tighten brake:
Loosen bottom nut and move 1/4 inch
down. Lift up the threaded rod and spin nut
down tight to bracket.
Tighten both nuts.
Re-test to verify.
Top Nut
Bottom Nut
Dip 4
31