Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 26 / 49

TROUBLE SHOOTING GUIDE
Wheel not spinning
when player moves
handle.
Check for 12 Volts DC at
coin up on connector.
No 12 Volts on connector at
coin up.
Inspect cable from Solenoid to main board.
(J22) Cable part #’s: AACE8869, AACE8850
Replace main board. (AANEWGEN1)
12 Volts present at connector,
but solenoid still doesn’t en-
gage.
Inspect cable as far into wheel as possible.
Look for broken or stretched wires.
Repair if possible.
Wheel will have to be removed to further in-
spect or replace.
Refer to “How to Remove Wheel”
Solenoid always stays
on.
Players can continue to
spin wheel after “good spin”,
allowing them to nudge it to
the bonus space.
Players will win a lot!
Jammed Solenoid or Springs
Pinched Cable.
Check for 12 Volts DC on cable
to solenoid when game on, but
not coined up in game play.
Inspect solenoid. Ensure it operates
smoothly.
Press in on silver bar. It is spring loaded and
will spring back after release.
Inspect cable for smashed wire. May also
have to replace main board.
If 12 Volts present, Replace main board.
(AANEWGEN1)
If no 12 Volts and solenoid is still engaged –
Wheel will have to be removed to further in-
spect or replace.
Refer to “How to Remove Wheel”
Problem Probable Cause Remedy
26