Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 35 / 49

HOW TO: Install Printer
Parts included in Kit:
2 of A5PRTH003 - Printers
2 of A5PYTH010 - Rolls of Paper
2 of A5HLPR001 - Paper Holders
2 of A5PL8902 - Metal Mounting Plates
1 of AACB8856 - Printer Controller Board
1 of AACE8923 - Cable from Controller Board to
Right Side Printer
1 of AACE8924 - Cable from Controller Board to
Left Side Printer
1 of AACE8925 - Jumper from Blue Socket on
Main Board to Controller Board
2 of AACE8926 - Power Cable from Power Supply to Printers
*Printers for Crank It Revolution are a factory option.
If you choose to add printers to your game, call our service
department to order a printer kit -
Part # AAPR-CIR
Place a side piece onto the core holder.
1.) Remove the printer parts from the box and assemble both printers.
Attach the core holder to the arm using the large screw provided.
Attach the arm to the printer body using the 3
smaller screws. BE SURE TO INSTALL IT ON
THE CORRECT SIDE, as shown.
Use a zip tie to manage the cable, as shown.
Place the paper roll onto the core and then snap
the final side piece onto the holder. Note: Paper must
feed under holder
and into printer
35