Bay Tek Games Crank It Revolution, Руководство по обслуживанию

Страница: 25 / 49

TROUBLE SHOOTING GUIDE
No Sound
Volume set to zero in menu.
Disconnected, loose or broken
wires.
Faulty speaker. Enter N3 in menu for game volume.
Enter N4 in menu for attract volume.
Check connections and reseat J19 on main
board. Cable # AACE8858
Replace speaker. AACE8811
Tickets Owed
Display
is
adding up
correctly
Opto-Sensor on ticket dispenser
dirty.
Faulty ticket dispenser.
Notch on tickets cut too shallow.
Faulty cable. Disconnected, loose
or broken wires.
Faulty Main Board.
Blow dust from sensor and clean
with isopropyl alcohol.
Replace with working dispenser to
isolate the problem. (A5TD1)
Flip tickets and load upside-down
to have large cut notch toward opto
sensor.
Check connectors from ticket dis-
pensers to main board. Check for
continuity. Cables AACE8852,
AACE8853
Replace main board.
Tickets Owed
Display
is not
adding correctly
Game is scoring too soon – before
wheel stops.
Wrong ticket pattern selected.
Brake Assembly tension set to
loose. Refer to
“How to Set Brake Tension”
Enter menu and select MENU 6.
Turn wheel downward and watch
display. The display should match
the wheel. If not, enter menu and
select MENU 2. Verify game is set
to correct ticket pattern.
Tickets do not
dispense or
Wrong amount
dispensed.
Check for the
correct amount
of tickets
adding up on
Display
Problem Probable Cause Remedy
Meters do not work.
Game meter will click at start
of next game.
Ticket meter will click for every
notch the dispenser “sees”
Disconnected, loose or broken
wires.
Faulty counters.
Check connections and reseat J22 on main
board. Cables # AACE8850 and AACO1000
Replace counters. AACO1000
Display not lighting up
Cycle game power off, wait 10
seconds, turn back on after
checking connections.
Phone cable to Display is bent,
pinched or unplugged.
12 Volts DC to Display
Faulty Display Board.
Inspect cable and sockets. Replace cable if
needed. AACE8859
Verify 12 Volts DC to Display. Check and/or
replace power supply if needed. AAPS1008
Replace Display Board. AACB8851
25