Baxi iMPI/E V200 11-16 Скачать руководство пользователя страница 9

Страница: 9 / 60

Remove the casing only to perform maintenance and repair work. Put the

casing back in place after maintenance and repair work.
The user must make sure the refrigerant pipes are checked annually for

leaks for any heat pump with a charge greater than 5 tonnes of CO

equivalent.

1.9

Liabilities

Manufacturer's liability

Our products are manufactured in compliance with the requirements of the various Directives appli

cable. They are therefore delivered with the marking and any documents necessary. In the inter

ests of the quality of our products, we strive constantly to improve them. We therefore reserve the

right to modify the specifications given in this document.

Our liability as manufacturer may not be invoked in the following cases:

Failure to abide by the instructions on installing the appliance.

Failure to abide by the instructions on using the appliance.

Faulty or insufficient maintenance of the appliance.

Installer's liability

The installer is responsible for the installation and initial commissioning of the appliance. The instal

ler must observe the following instructions:

Read and follow the instructions given in the manuals provided with the appliance.

Install the appliance in compliance with prevailing legislation and standards.

Carry out initial commissioning and any checks necessary.

Explain the installation to the user.

If maintenance is necessary, warn the user of the obligation to check the appliance and keep it in

good working order.

Give all the instruction manuals to the user.

User's liability

To guarantee optimum operation of the system, you must abide by the following instructions:

Read and follow the instructions given in the manuals provided with the appliance.

Call on a qualified professional to carry out installation and initial commissioning.

Get your installer to explain your installation to you.

Have the required inspections and maintenance carried out by a qualified installer.

Keep the instruction manuals in good condition close to the appliance.

1 Safety instructions and recommendations

7700954 - v03 - 13082018

iMPI V200

Содержание iMPI/E V200 11-16





























































Результаты поиска

Содержание iMPI/E V200 11-16

Отзывы:

Похожие инструкции для iMPI/E V200 11-16

Бренды по названию

Популярные бренды

Baxi iMPI/E V200 11-16, Руководство пользователя

Результаты поиска

Содержание iMPI/E V200 11-16

Отзывы:

Похожие инструкции для iMPI/E V200 11-16

Бренды по названию

Популярные бренды