Battenfeld UNILOG B2, Руководство по эксплуатации

Страница: 55 / 126

Operation and Control System
A: R82GB0FA.PMD
B: R82DE0FA.P65
E: 080403 / T. Weiß
G: 200103 / TCS
Section 5.5
Page 3
?
11 - Gripper button
Press this button to switch to the Gripper
status page in Manual and Automatic
mode. In Programming mode it switches
to the Gripper command selection page. The
orange LED belonging to the Gripper button
lights up when one of these two pages is
selected.
12 - ENTER button
Select ENTER to confirm a numerical
entry.
13 - NUM button
Press the NUM button to activate the
numerical pad and ”,” and ”+/-” on the
MCD. The orange LED belonging to this
button lights up when the numerical pad is
activated.
14 - ESC
Press the ESC button to switch to the
Start-up display, or, in Programming
mode, to move back one level to the
program.
15 - C button
The C (CLEAR) button is activated when
the numerical keypad is on. Press to
delete the last entered number on the
numerical keypad. If this button is pressed in
the Programming page this deletes the selected
program line after an option box has been
confirmed.
16 - IMM button
Press the IMM button to display the IMM
interface status page in Manual mode. or
the IMM commands in Programming
mode. The orange LED for this button lights up
when one of these two pages is selected.
17 - Cursor buttons
The Cursor buttons are used to move the
screen cursor up and down.