Battenfeld UNILOG B2, Руководство по эксплуатации

Страница: 107 / 126

Maintenance
A: R82GB0HA.PMD
B: R82DE0HA.PMD
E: 080403 / T.Wenger
G: 020403 / TCS
Section 7
Page 5
If the power from the rotary shaft decreases,
this may be due to leaking blade or housing
gaskets or sluggish bearings.
7.4.3.1 Settings C - axis (tilting)
The swivel angle can be adjusted at the end
positions with the aid of the setting screws and
the stop.
Speed adjustment:
The swivel speed can be adjusted using the
outlet valves on the swivel cylinder.
7.4.4 Pneumatic B-axis
The swivel axis is a compact twin blade part-
turn actuator. The continuous shaft is fitted with
maintenance-free ball bearings on both sides
inside the housing. The part-turn actuator
rotates at a maximum angle of 100°. The
smooth shafts are connected to the swivel fork
by a clamping hub. The required angle of
rotation is achieved by means of externally
mounted, adjustable, locked stops.
• Medium-filtered compressed air
• Operating pressure: 4 to 8 bar (58 to 116
psi)
• Ambient temperature: +5° C to +60° C
(41 °F to 140° F)
• Medium temperature: +5° C to +60° C
(41 °F to 140° F)
• Swivel time: 0.1 to 1.4 s/90°
• Torque at 6 bar – 16 Nm (87 psi – 11.8
lbf. ft.)
If the power from the rotary drive decreases this
may be due to a leaking blade or housing gasket
or a sluggish bearing unit.
Exhaust air
valve
At 0°
(Basic position)
Exhaust air
valve
at 90°
(End position)
Adjusting bolts for 90° swivel
angle + 3.5°
R8B2_162.PDF