Bartscher 104523, Руководство пользователя

Страница: 30 / 35

Cleaning
24 / 35 104523
EN
Cleaning and Disinfecting Cycle
To avoid problems caused by water hardness, and thus generation of impurities on
parts and components that come in contact with water, the ice-cube maker is
equipped with
'Self Cleaning' function.
This function, owing to citric acid's cleaning action, makes it possible to remove
limesacle and impurities from the appliance.
To provide for correct cleaning of the ice-cube maker, we recommend to perform
this cleaning and disinfecting cycle at least 3
–4 time a year (depending on water
hardness).
When using the citric acid (water + citric acid solution,
see table below) maintain proper precautions and use
safety gloves and safety glasses.
The cleaning and disinfecting cycle should be carried out according to the following
instructions:
1. Switch the ice-cube maker off.
2. Disconnect the appliance from water supply (close the shut-off valve).
3. Remove ice cubes from the storage container.
4. Prepare a water and citric acid solution in a suitable container. Take into
account the quantitative data for different models provided in the below table.
Model Amount of citric acid (for 1
litre of water)
B28 Plus 200 g
B38 Plus 250 g
B46 Plus 350 g
B70 Plus
– B86 Plus
500 g
5. Dissolve the required amount of citric acid in 1 litre of lukewarm water (max.
40°C). Make sure the citric acid dissolves in full.
6. Pour the prepared water and citric acid solution into the evaporator's container
in the appliance (Fig. 17).
7. Turn the appliance on with the control key (Fig. 9).
8. Switch the appliance into Standby mode (should it not be in it already) by
pressing the control key for at least 3 seconds.
9. In the Standby mode keep pressing the control key for at least 9 seconds, to
start the cleaning and disinfecting cycle.
During the cleaning and disinfecting cycle the control key (white) blinks the following
way: on for 1 second, then off for 3 seconds.