Bartscher 104523, Руководство пользователя

Страница: 20 / 35

Installation and operation
14 / 35 104523
EN
4.3 Operation
When producing ice cubes in the shape of a full cone using the spray system, the
supplied water is sprayed on the evaporator unit (here in the form of a water pan)
with a pump. When in contact with a suitable evaporator's element water freezes,
creating condensed, crystal clear, full ice cube cones. Due to its massive form they
provide long-lasting cooling effect and are particularly suitable for making the beast
of long drinks, for they melt slowly and do not dilute beverages too fast.
The number of ice cubes in the storage container is controlled by electronic probe,
which is located in the storage container. When ice cubes pile and reach the probe,
the appliance automatically stops production of ice cubes. When ice cubes are
removed and the probe is freed, the production of ice cubes is continued again.
NOTE!
After dispensing ice cubes from the storage container you may clean the
probe off of ice remains, so that the new production process re-starts
faster.
5 Installation and operation
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.