Bartscher 104523, Руководство пользователя

Страница: 31 / 35

Cleaning
104523 25 / 35
EN
When the cleaning and disinfecting cycle is over the appliance switches to Standby
mode.
10. Remove the plug of the evaporator's water pan and empty it by draining water
(Fig. 18). Next, re-fit the plug.
11. Pour fresh potable water into the evaporator's pan to fill it up.
12. Repeat the cleaning and disinfecting cycle (this time without the citric acid) to
remove remains of the water and citric acid solution.
13. Switch the appliance off.
14. Remove the plug on the evaporator's camber and empty the evaporator's pan
by draining it (Fig. 18). Reinsert the plug.
15. Open water supply (open the shut-off valve).
16. When the cleaning and disinfecting cycle is over, rinse the storage container
with fresh water.
ATTENTION!
If the cleaning and disinfecting cycle is activated accidentally (pressing
the control key for at least 9 seconds) there are two methods of stopping
this process:
1. after approx. 1 hour 40 minutes: press the control key for 3 seconds
for the appliance to return to Standby mode; press the control key
again for 3 seconds to start the production cycle.
2. after 2 hours 30 minutes: the appliance switches to Standby mode
automatically; next, press the control key for 3 seconds to start the
production cycle.