Bartscher 104523, Руководство пользователя

Страница: 25 / 35

Installation and operation
104523 19 / 35
EN
After dispensing ice cubes clean the probe off of ice remains, so that the
new ice cubes production process re-starts faster (Fig. 14).
Setting the Size of Ice Cubes
With time, due to the change in ambient temperature in a room, the size and weight
of ice cubes may change.
To set the size and weight, preform the following steps:
1. When the appliance is on, press the control key 3 times over a 2-second period
(Fig. 9).
The control key lights up in white or red.
2. To increase the size or weight of ice cubes, press the control key to increase red
colour of the LED.
3. To decrease the size or weight of ice cubes, keep pressing the control key until
LED colour changes to white.
If the control key is not pressed during 5 seconds, the entered setting will be saved
and the appliance will leave the change phase.
Setting Probe in Storage Container
With time, due to the change in ambient temperature, the set value for temperature
probe in the storage container may appear to be insufficient. To set this value,
proceed the following way:
1. In Standby mode, press the control key 3 times over a 2-second period (Fig. 9).
The control key lights up in white or red.
2. To increase the set temperature, press the control key and try to increase the
red colour of the LED.
3. To reduce the temperature, press the control key repeatedly until its LED
changes its colour to white.
If the control key is not pressed during 5 seconds, the entered setting will be saved
and the appliance will leave the change phase.
Operation Status / Alarm Status Indicators
Indicator / Alarm RED WHITE
Too long a cooling cycle alarm blinks 1x ON 3"