Bartscher 104523, Руководство пользователя

Страница: 22 / 35

Installation and operation
16 / 35 104523
EN
• Then lift the appliance with a suitable lifting equipment (lift truck or the like) and
remove he wooden base.
• Place the appliance in a suitable location.
Requirements for Place of Installation
When selecting the place of installation, provide for the following conditions:
– ambient temperature may not drop below 10°C (50°F) and rise above
43°C (110°F);
– water temperature may not be below 10°C (50°F) nor above 32°C (90°F)
(Fig. 4 at the beginning of the operating instructions);
– water supply pressure may not be below 0.1 MPa (1 bar) nor above
0.5 MPa (5 bar). If the pressure exceeds 0.5 MPa, install a pressure
reducer between water supply and the appliance (Fig. 5);
– there may be no heat sources in the vicinity,
– the appliance may not be subject to direct sunlight (Fig. 6);
– the location must be free of dust, as the condenser of the cooling unit
may clog rapidly (Fig. 8);
– the fan of the cooling unit may not be covered (Fig. 8),
– the appliance may not be installed in plunged areas, as in the case of
possible leakages, the coolant will be sinking down (Fig. 15),
– there may be no fuels, flammable nor explosive materials within the
radius of 3 m, and there must be sufficient air circulation provided for
(Fig. 19).
• Maintain minimum clearance from walls and other objects: 150 mm at the rear,
and 50 mm at both sides (Fig. 3).
• Level the appliance (Fig. 3). If the appliance is not levelled, it may negatively
affect its functionality, as well as water supply.
Water Connection
1. Install the appliance near a water connection.
ATTENTION!
Connect the appliance only to a supply connection of potable water.
Otherwise install a water purification appliance.
2. Execute water connections before you execute electric connections.
3.
Connect the enclosed 3/4” water drain tube to the water connection.