Barry-Wehmiller Thiele Technologies Streamfeeder Reliant..., Руководство пользователя

Страница: 44 / 72

38 R
eliant
1500 M
anual
Preventive Care
(continued)
Cleaning schedule for various materials:
• Typical: every month
• Dusty: after every shift
• High ink or varnish: 1 time per shift
Standard
O-Ring Gate
Bar Gate
Clean angled wedge
Figure 43. Cleaning Standard
O-Ring Gate
Figure 44. Cleaning Bar Gate
Cleaning Gate Assembly
Use only isopropyl alcohol (98% concentration). Do not use any
other types of solvents. They can cause premature wear of the
belts, or even total breakdown of the material.
To clean gate assemblies:
1. Turn Off feeder and remove power cord from outlet.
2. Move the feeder back from the gate plate to allow working
clearance. You can save much re-alignment time if you mark
the current position on the back deck plate before moving.
3. Remove gate assembly from gate bracket assembly.
4. Apply a small amount of isopropyl alcohol to a soft cloth.
5. Wipe across O-rings (Figure 43) or angled wedge if applicable
(Figure 44), first in one direction then the other.
6. Taking a dry portion of the cloth, go back and wipe all sur -
faces to ensure they are dried.
7. Return feeder to original position marked on back deck plate.
Restore power.
Clean all O-rings