Barry-Wehmiller Thiele Technologies Streamfeeder Reliant..., Руководство пользователя

Страница: 39 / 72

33
R
elaint
1500 M
anual
6
Inspection and Care
Please read this Section to learn how to:
• Visually inspect your machine to detect part problems which may
require adjustment or replacement.
• Periodically care for your machine to prevent any operational prob -
lems.
! ! !
When performing initial installation, always
make sure you turn Off the main power
switch and disconnect all equipment from
the electrical power source. Failure to do so
can expose you to a potential start-up, and
therefore moving parts which can cause
serious injury.
Do not attempt feeder installation while the
inserter is running. Failure to do so can expose
you to moving parts which can cause serious
injury.
Avoid turning on the feeder or making initial
adjustments until all parts are secured. Failure
to do so can cause damage to equipment.
Visual Inspection
Checking for Drive Belt Wear
Referring to Figure 35, check for visual signs of:
• Fraying. Replace as required (see the Technical Information
Guide
for more information).
• Missing teeth. Replace as required (see the Technical Infor-
mation Guide for more information).
• Cracking. Replace as required (see the Technical Information
Guide for more information).
• Paper residue buildup. Clean from belts, especially in grooves.
For more information, see “Preventive Care”, page 37.
Checking for Feed Belt Wear
Referring to Figure 34, check for visual signs of:
• Walking. Replace as required (see the Technical Information
Guide for more information).
• Cracking. Replace as required (see the Technical Information
Guide
for more information).
• Thinning. Replace as required (see the
Technical Information
Guide for more information).
Feed belts
Drive belt
Figure 35. Inspecting Drive Belt
Figure 34. Inspecting Feed Belts