Barry-Wehmiller Thiele Technologies Streamfeeder Reliant..., Руководство пользователя

Страница: 11 / 72

5
R
elaint
1500 M
anual
Controls and
Sensors
Read the following descriptions to become familiar with the controls
and sensors. See Figure 4 for locations
ON/OFF SWITCH. This rocker switch determines whether AC power
to the feeder is “On” or “Off”. Push the horizontal line ( — ) to turn
“On” and push the circle ( O ) to turn “Off”. It is located at the rear of
the feeder.
PHOTO SENSOR. Sends signals to the relay circuit to both “start”
and “stop” the feed cycle. Also called a sheet sensor, it “looks” for
the leading edge of the bottom sheet of material to stop the machine.
When the gripper jaw removes the bottom sheet of material, the feeder
starts and then feeds the next sheet. The machine stops as the sensor
“sees” the leading edge. The sensor uses two LED indicators. A green
LED functions as the power indicator and is constantly lit during
normal operation. The second LED is amber, and indicates the pres -
ence of product staged under the sensor. Amber LED on indicates the
sensor "sees" product; off when no product is present.
Read the following descriptions to become familiar with the connec -
tors and cables. Refer back to Figure 4 for location.
AC POWER INLET/FUSE. This 3-prong connector receives incom -
ing AC power from the designated power source. One end of AC
power cord plugs into power inlet (rear of machine), while the other
plugs into a three-prong grounded and fused outlet.
Connectors and
Cables
Figure 4. Feeder (Rear)
On/Off Switch
Fuse Holder
AC Power
Inlet
Connector