Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 67 / 83

1 Circuit board
Change of Fork Prong Bar
Caution
Wear gloves when touching a fork prong bar.
When wear of the fork prong bar results in no
margin for tightening the nut on the fork prong
bar, replace the fork prong bar.
Loosen the nut, and then replace the fork
prong bar.
2
1
jm8lgp-001
Change of Fork Prong Bar_001
1 Fork prong bar
2 Nut
Adjust the fork prong bar.
"Adjustment of Rake" (Page 4-14)
Tighten the nut.
Change of Smoother Plate
Replace the smoother plates if smoothing
ability decreased due to the plates wear.
Remove the nuts with friction ring, bolts and
washers.
3
2
1
4,5
67ytmp-001
Change of Smoother Plate_001
1.
2.
3.
1.
1 Smoother plate
2 Nut with friction ring
3 Chain
4 Bolt
5 Washer
Replace the smoother plates.
Install the bolts, washers and nuts with
friction ring.
Important
If the chain completely fixed with the nuts with
friction ring, the smoother plates cannot level
out very well.
Tighten the nuts with friction ring so that the
chain can move.
Change of Small Blade
Note:
Depending on the specifications, this function
may not be available.
When wear of the small blade causes a
reduction in the amount of sand that is lifted
up, replace the small blade.
Loosen the bolts installing the small blade,
and then replace the small blade.
3
2
1
ez5gsw-001
Change of Small Blade_001
1 Blade
2 Small blade
3 Bolt
Adjust the small blade.
"Adjustment of Blade" (Page 4-15)
Tighten the bolts.
2.
3.
4.
1.
2.
3.
Maintenance
SP160EB
Maintenance
Page 5-11
Maintenance Work