![Baroness SP160EB Скачать руководство пользователя страница 75](http://html1.mh-extra.com/html/baroness/sp160eb/sp160eb_owners-operating-manual_4023255075.webp)
Disconnect the battery cable.
Refer to the figure and disconnect the
battery cable in the appropriate order.
Disconnect the wires in order, from
(negative) terminal
①
to terminal
⑫
.
Use the included battery handle to replace
the battery.
For installing the battery, reverse the
removing procedure.
1
2
3
5
4
5
6
8
7
4
3
1
2
1
12
:LUH+DUQHVV
2
1
9
12
10
11
4jes59-005
Replacement of Battery_001
1
Negative wire (black)
2
Positive wire (red/green)
3
Negative wire (black)
4
Positive wire (red)
5
Front
Replacement of Battery Cable
When replacing the battery cable, observe the
following precautions.
Danger
Danger
Keep away from fire while replacing the
battery cable.
The battery may explode.
Perform the operation in a well-ventilated
area, where parts will not get wet, for
example, from rain.
Danger
Danger
Do not short-circuit the battery.
The battery will short-circuit not only if the
positive and negative terminals come into
contact with a metal tool but also if the
positive terminal comes into contact with any
metal part (for example, the main vehicle).
2.
3.
4.
Danger
Danger
When the battery terminals are connected to
the vehicle's cable terminals, securely tighten
the nuts.
Inadequate tightening may result in a fire or
explosion.
Warning
When connecting the vehicle's cable terminals
to the battery, do not reverse the connections
to the positive and negative terminals.
Warning
Do not obstruct the battery's vent plug or side
exhaust holes with the connected cables, etc.
Caution
If terminal covers and heat shield plates are
installed on the battery, install them in their
original positions after replacing the battery.
Follow the steps below to replace the battery
cable.
Switch off the machine and remove the key.
Disconnect the battery cable.
Refer to the figure and disconnect the
battery cable in the appropriate order.
Disconnect the wires in order, from
(negative) terminal
①
to terminal
⑫
.
For installing the battery cable, reverse the
removing procedure.
1
2
3
5
4
5
6
8
7
4
3
1
2
1
12
:LUH+DUQHVV
2
1
9
12
10
11
4jes59-005
Replacement of Battery Cable_001
1
Negative wire (black)
2
Positive wire (red/green)
3
Negative wire (black)
4
Positive wire (red)
5
Front
1.
2.
3.
Maintenance
SP160EB
Maintenance
Page 5-19
Maintenance Work
Содержание SP160EB
